Unterschiede

Hier werden die Unterschiede zwischen zwei Versionen angezeigt.

--- server:glusterfs [2009/10/13 09:34] – swordfish
+++ server:glusterfs [2025/01/25 16:56] (aktuell) – Externe Bearbeitung 127.0.0.1
@@ Zeile 1: / Zeile 1: @@
 ====== Fuse ======
+Packete Installieren:
+<code bash>
+apt-get install fuse
+</code>
 Installieren:
 <code bash>
 cd /opt
-wget ftp://ftp.zresearch.com/pub/gluster/glusterfs/fuse/fuse-2.7.4glfs11.tar.gz
+wget http://www.doebl.eu/wiki/download/fuse-2.7.4glfs11.tar.gz
 tar -zxvf fuse-2.7.4glfs11.tar.gz
 cd fuse-2.7.4glfs11
-./configure
+./configure --enable-kernel-module
 make
 make install
 </code>
+====== GlusterFS 3.0.3 ======
+Packete Installieren:
+<code bash>
+apt-get install build-essential flex bison byacc libdb5.1-dev
+</code>
-====== GlusterFS ======
+Installieren:
-# Bison Installieren
 <code bash>
-cd /usr/ports/devel/bison/ && make install clean
+cd /opt
+wget http://www.doebl.eu/wiki/download/glusterfs-3.0.3.tar.gz
+tar -zxvf glusterfs-3.0.3.tar.gz
+cd glusterfs-3.0.3
+./configure --prefix=/usr
+make
+make install
+ldconfig
 </code>
-Alloca.h Hack vor FreeBSD
+====== GlusterFS 3 ======
+Packete Installieren:
 <code bash>
-echo "#include <stdlib.h>" > /usr/include/alloca.h
+apt-get install build-essential flex bison byacc libdb4.6 libdb4.6-dev
 </code>
-# Installieren
+Installieren:
 <code bash>
-mkdir /opt
 cd /opt
-wget http://ftp.gluster.com/pub/gluster/glusterfs/2.0/LATEST/glusterfs-2.0.4.tar.gz
+wget http://ftp.gluster.com/pub/gluster/glusterfs/3.1/3.1.2/glusterfs-3.1.2.tar.gz
-tar xvzf glusterfs-2.0.4.tar.gz
+tar -zxvf glusterfs-3.1.2.tar.gz
-cd glusterfs-2.0.4
+cd glusterfs-3.1.2
+./configure --prefix=/usr
+make
+make install
+ldconfig
+</code>
-# Hack configure so it assumes fuse is installed
+====== GlusterFS 2 ======
-In ./configure, change:
+Packete Installieren:
-BUILD_FUSE_CLIENT=no **to** BUILD_FUSE_CLIENT=yes
+<code bash>
-ac_cv_lib_fuse_fuse_req_interrupt_func=no **to** ac_cv_lib_fuse_fuse_req_interrupt_func=yes
+apt-get install build-essential flex bison byacc libdb4.6 libdb4.6-dev
+</code>
-# Manually set proper paths
+Installieren:
-export LDFLAGS="-L/usr/local/lib -liconv"
+<code bash>
-export CFLAGS="-I/usr/local/include/"
+cd /opt
+wget http://ftp.gluster.com/pub/gluster/glusterfs/2.0/LATEST/glusterfs-2.0.9.tar.gz
-# Build and install
+tar -zxvf glusterfs-2.0.9.tar.gz
-./configure –enable-fuse-client
+cd glusterfs-2.0.9
+./configure --prefix=/usr
 make
 make install
+ldconfig
 </code>

server/glusterfs.1255426478.txt.gz · Zuletzt geändert: 2025/01/25 16:55 (Externe Bearbeitung)

Nach oben